HUAWEI Y360-U82 Firmware + NVRAM CM2 Backup

Download HUAWEI Y360-U82 Firmware + nvram File CM2 Backup

 

HUAWEI Y360-U82 firmware

HUAWEI Y360-U82 Firmware EXCLUSIVE File

huawei firmware remove to viruse

This Firmwar is good .

This flash to solve all the problems of mobile .

To solve the problem of RESTART .

To solve the problem standing on the logo .

To solve the problem Hang On Logo .

To delet Pattern Lock,Pin Lock,Privacy lock,Application Not Support,Slow .

To solve Deadphone,Blank Screen,White Screen Etc.

To solve the problem of viruse and malicious programs .

Also contains a file NVRAM to solve the problem imei and wifi .

This firmware format Scatter file .

 

Stock Rom Details:

Smartphone Brand Name: Huawei

Smartphone Prod Model Name: Y360-U82

Require Chipset/Cpu: Mediatek 6572

Operating System Version: Android

Firmware Support Area: All Country

Firmware Type: Factory scatter Created

Language Support: Multi Language

This Firmware Read done By CM2 Dongle .

 

Info CM2 Dongle

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : HUAWEI
Device Model : HWY360-U6572
Device CPU : MT6572
Device IntName : Y360-U82
Device Version : 4.4.2
Device Compile : 2/24/2016 10:11:55 AM
Device Project : ALPS.KK1.MP7.V1.22
Device ExtInfo : HUAWEI Y360-U82

 

Wait for phone…
Phone found! [ 5 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 110100303034474530011112F146C2DF
Initialize Memory … 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 0EG40
[eMMC] : FLASH_CID : 110100303034474530011112F146C2DF
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0xE5974B4A9318F64D1AC470C2ABB024E9
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now … 

Brand     : HUAWEI
ProdName  : Y360-U82
ProdModel : HUAWEI Y360-U82
Device    : HWY360-U6572
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1.22

[Read Ok] : preloader_wt98860.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : global_cust.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / wt98860 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1446 MiB

These files are protected by password

Pass Files

www.t-flash.net

Click Her To Download Files Now

Model File Type Download Pass
HUAWEI Y360-U82 Firmware File Download www.t-flash.net
HUAWEI Y360-U82 NVRAM File Download www.t-flash.net

Pass File

www.t-flash.net

Application Flashing The Mobile 

SP_Flash_Tool_v5.1712_Win.rar

Flashing/Installer Guideline

  • Download Your Targeted Flash File/Stock Rom.Recheck Your Model & Version.
  • Download Smartphone (SP) Flash Tools Or Supported Flash Tools.
  • Download Mediatek Usb Driver.Mustbe Your smartphone Model Supported
  • Unzip download flash firmware/Stock Rom.
  • Setup Usb Android Mediatek smartphone Driver.(Skip Already Install driver.)
  • Setup/open Mediatek smartphone Flash Tools.
  • Open Smartphone (SP) Flash Tool.
  • Load your Targeted model scatter/Document file.Then All File Auto Select .
  • Battery Charge minimum 50%.Its important issue for Flash.
  • Connect Usb Cable with Pc.
  • Press Flash/Download/Upgrade Button.
  • Reconnect Battery.
  • Press Volume – or Boot key & inset usb Cable.
  • Wait 3-8 Minute For Flash Done.

GOOD BY

4 thoughts on “HUAWEI Y360-U82 Firmware + NVRAM CM2 Backup”

Leave a Comment

Your email address will not be published. Required fields are marked *

Exit mobile version